Salient Features & Application :
Abrasive for Blast Cleaning & Finishing.
Copper Slag abrasive is suitable for :
Blast Cleaning of mile steel and stone/ concrete surfaces,
Removal of mill scale, rust, old paint, dirt
Salient Features : Steel cut wire shots are used in an various number of important applications where non-ferrous components like stainless steel, titanium, aluminium, are to be blasted and ferrous contamination is harmful to the component.
Applications :
For Surface
Salient Features & Application :
For Surface Cleaning
Descaling
Deburring
De-flashing
Shot peening
Best for Low Pressure Machines.
All of the above on components made of iron, stainless steel &
Urea Plastic Blast Media is a plastic grain stripping abrasive used in sandblasting operations. It is the most widely used plastic media. Urea Plastic Abrasive Grit is environmentally friendly and recyclable – an alternative to chemical stripping. Urea Plastic Abrasive Grit is formulated to
Salient Features :
Steel grits are manufactured in conformity with standards IS-4606/1983, SAE-j827, BSS & DIN.
Steel Grit characterises under grains with a predominantly angular shape.
These grains are obtained by crushing steel shots.
They exhibit sharp edges and broken sections.
These are
Salient Features :
Steel shots are spherical grains made of molten steel through an atomisation (granulation) process.
These cast steel shots are available in different sizes & hardness.
Applications :
Widely used for Shot Blasting & Shot Peening
Salient Features :
Recommended for the following :
Fast cleaning
Removal of heavy rust
Corrosion using coarse abrasive - etching etc.
Works on direct pressure principle of blasting.
Produces high abrasive velocity - thus cleans component faster.
Automatic abrasive refilling arrangement.
High
Applications and Salient Features :
Acquiring matte finish
Maintaining a continuous blasting cycle.
Surface Cleaning
Deburring
Works on Suction Induction principle of abrasive delivery.
Our machine ensures continuous
Applications and Salient Features :
Airless Internal Spray Painting of pipe from 600 mm to 2500 mm
Internal pipe attachment from 50 mm ID to 2.5 meters ID.
3 times faster than manual operations.
Linear Speed up to 5 meter/ minute
Oscillation speed - 0.25 to 0.9 meter/ sec.
Renders uniform
Salient Features :
We have in store with us an impeccable spectrum of Portable Abrasive Blasters.
Customers can make use of varied media as an abrasive for different activities and finishes.
Fabricated in accordance with the set industrial guidelines, our range is available in standard and
Applications and Salient Features :
Our Helmet Air Breather separates moisture, oil, dust particles and harmful gases from air supply line and provides purified air to the helmet.
Our special designed model can remove oil mists, water vapour and particulate up to 0.5
Applications and Salient Features :
Full Range of Blasting Nozzles with Metal Casing for Improved Life on any Abrasive Like Aluminium oxide, Steel Grit / Shots. Glass Beads, Sand and Copper Slag used for Sand/ Shot/ Grit/ Abrasive Blasting Machines for the purposes of surface finishing and
Applications and Salient Features :
The bucket elevator lifts the media with the help of Bucket Elevator Belt and Buckets and pours into Media Separation Unit from where the reusable abrasive goes into the Portable Abrasive Blaster and Abrasive is recycled through blast nozzle.
The buckets are of
Features :
Removal of corrosion
Removal of mill scale
Removal of coatings
Removal of heat treatment residue
Removal of carbon buildup
Removal of tool marks
Removal of burrs etc.
Applications :
Provides comfortable grip for operator
Allows precise control of blast pattern
Renders uniform
Applications and Salient Features :
The Air-fed Abrasive Blasting Helmet is used to protect the operator from all sorts of dangers associated with abrasive blasting.
The Air-fed Abrasive Blasting Helmet is is designed to optimise safety, minimise operator downtime and increase
Applications and Salient Features :
Flenge Type Mixing Tube Assembly - Most appropriate for Portable Abrasive Blasters.
Cross Type Mixing Tube Assembly - most appropriate for Cabinet Type (Pressure Blasters)
Available in various colours & sizes as per your
A cylone dust collector is to separte any metallic or other dust particles form th spraying / Blasting room and discharge clean air to the atomosphere. In this suction created by exhaust fan caused the dust laden air to enter the cyclone dust particles get separated by a centrifugal action and get
How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan an passes through fabric bags. Heavier dust particles fall into hopper due to loss of momentum. Finer dust gets deposited on inner surface of fabric bags and dean air passes across outer
How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan and passes through filter cartridge elements, The abrasive resistant inlet promotes dropping cut high particulate, generates uniform air flow, thus increase filter life. The dust gets
How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan and passes through Pleated Bag elements. The abrasive resistant inlet promotes dropping out high particulate, generates uniform air flow, thus Increase filter life. The dust gets deposited
Features :
Sturdy, rugged & are proven across a wide variety of working conditions.
Designed to carry out the multifarious jobs of cleaning & peening in faster time comparatively.
The latest deign of Blast Wheel keeps the maintenance cost significantly low.
The rubber conveyor belt is
Features :
Our Airless Hanger Type Shot Blasting Machine can be tailored according to your requirement & component/ job size.
The number of Blast Wheels varies according to the job size for the wide variety of work pieces for large production output in terms of Surface treatment.
The over -
Applications and Features :
Attain smooth complexion.
Aesthetic finish on Die Castings of Aluminium, Zinc & Alloy Steel.
De-sanding & descaling of castings and forgings.
Preparation of Surface for Protective coating.
Removal of heat treated
Features & Application :
LPG Cylinder - SA 2 ½ Finish – Surface Preparation
Paint & Rust Removal
Shot Blasting Process
The Machine comprises of the following :
Cabinet
Cabinet Liners
Centrifugal Wheel Assembly
Vestibule
Abrasive Circulation System
Diabolo Conveyor
Manganese Tile, Plates & Liners :
Mn. Hanging Type Liners
Mn. Headed Bolt Type Linerss
Top Liners
Side Liners
End Liners
Available in the following sizes: (inches)
BW 12/ BW 15
BW 19/ BW 1215
BW 1519/ BW 17/ BW 21
BW
The range is suitable for tough working conditions and suitable for high viscosity,
solvent-less low solvent coating, semi solid coating, marine coating etc. .
FEATURES:
Pneumatically sensed High
Performance Air Motor
High Flow Rate
Stainless Steel
Rust Proof
Hydraulic Body
Easy Maintenance
Ice
The range is suitable for tough working conditions and suitable for high viscosity,
solvent-less low solvent coating, semi solid coating, marine coating etc. .
FEATURES:
Pneumatically sensed High
Performance Air Motor
High Flow Rate
Stainless Steel
Rust Proof
Hydraulic Body
Easy Maintenance
Ice
Features :
High flow rate pumps and guns
Priming piston (shovel) type. Suction for high viscosity fluid
Auto shut off for pumps
Facility for twin pail switchover system
Drum capacity upto 200 Itr.
Custom built system for more drum capacity with special features.
Dispensing / spraying nozzles to
The range is suitable for transferring paints materials, Oils, explosive liquids, feed multiple spray guns and paints circulation systems. It is design for for high delivery upto 30 Itr/min.
FEATURES:
Pneumatically sensed Air Motor
High Flow Rate
Stainless Steel
Rust Proof
Hydraulic
The range is suitable for transferring paint materials, oils, explosive liquids, feed multiple spray guns
and paint circulation system. It is designed for high delivery up to 16 ltrs/ min.
FEATURES:
Low Share Output
Very Less & Easy Maintenance
Compact & easy Assembly
Hard coated piston
Turbine Pneumatic Stirrer Series :
Turbine stirrer is rotary mixing stirrer driven by waterproof or EX- rated electric motors with gear box / pneumatic motors [smaller versions].
The rotary motion of the drive motor transmitted to the turbines blade which provides an efficient crushing and mixing
Features :
Increases Productivity.
Manual & Auto Agitation.
Eliminated wastage & color variatlon.
Non-standard tanks can also be supplied [MS & SS]
Standard tank sizes - 2.5, 9, 22 & 45 llters.
Paint tank inserts for various tank capacities.
Facilities continuous paint
The range is suitable for transferring paints materials, Oils, explosive liquids, feed multiple spray guns and paints circulation systems. It is design for for high delivery upto 120 ltrimin. and more. Features :
Pneumatically sensed Air Motor.
High Flow Rate-Four Ball Pump
Stainless Steel rust
Details :
Max Tip Size - 0.021
Max GPM (LPM) - 0.47 (1.8)
Max PSI (BAR) - 3300 Psi (227 BAR)
Motor HP - 5/8 DC
FTx" - Gun
RAC X" 515 Switch Tip" And Guard
1/4 IN X 50 FT (6.4 MM X 15M) Blue Max ll Airless
Graco 490 Electric Details :
Max Tip Size - 0.023
Max GPM (LPM) - 0.54 (2.0)
Max PSI (BAR) - 3000 Psi (227 BAR)
Motor - 1.0 HP Brushless DC
Contractor - Gun
RAC X" 517 Switch Tip And Guard
1/4 IN X 50 FT (6.4 MM X 15M) Blue Max ll Airless
Graco 690 Express Details :
Max Tip Size - 0.031 - 1 Gun, 0.023 - 2 Guns
Max GPM (LPM) - 0.95 (3.6)
Max PSI (BAR) - 3000 Psi (227 BAR)
Motor - 2.0 HP Brushless DC
Contractor - Gun
RAC X" 517 Switch Tip" And Guard
1/4 IN X 50 FT (6.4 MM X 15M) Blue Max ll Airless
Texture spraying is all about high productivity, and that’s where the Mark IV sprayer really delivers. Designed to save time and money by enabling you to spray more square footage in a day drywall mud in an orange peel, splatter or knockdown finish or even the wide range of primers and paint,
Pole Gun Extensions - Maximum WPR: 3800 psi, (248 bar, 24.8 MPa) :
Use with Contractor In-Line Valve and the CleanShot Shut-Off Valve to create different length pole guns
Thread Size - 7/8 in (22 mm), 244163 3 ft (0.9 m), 244164 6 ft (1.8 m)
RAC X Tip Extensions - Maximum WPR: 4050 psi, (280 bar,
To maximize performance, choose BlueMax II high performance airless hose. With superior flexibility and durability, BlueMax II is designed to ensure you get the best results from your airless sprayer. Feel the Difference :
Lighter Weight - Over 10% lighter weight and increased hose flexibility
ProGuard+ is designed to protect your 240V Graco equipment from damage from inconsistent electrical power.
ProGuard+ constantly monitors the supply voltage and disconnects the equipment from the power source to reduce the risk of damage to the equipment from excessive voltage fluctuations (high
The End Draft (the direction of flow of air is towards the floor of spray booth) Paint Spray Booth is suitable for conventional, air-less and electrostatic spray painting and its consists of painting chamber, Inlet Air Filter, Paint Trap Filters, axial flow Fan, electric motor, duct and canopy etc.
The Vertical Down Draft ( he direction of flow of air is towards the floor of spray booth) Paint Spray Booth is suitable for conventional, air-less and electrostatic spray painting and its consists of painting chamber, Inlet Air Filter, Paint Trap Filters. axial flow Fan, electric motor, duct and
The Semi Down Draft (the direction of flow of air is towards the side walls of spray booth) Paint Spray Booth is suitable for conventional. air-less and electrostatic spray painting and its consists of painting chamber, Inlet Air Filter, Paint Trap Filters, axial flow Fan, electric motor, duct and
The spray painting is carried out by operator with the help of spray painting gun (Buyer to arrange spray panting gunj. The paint fume particles are sucked by the partial vacuum created by exhaust fan through a water curtain. The air is cleaned by scrubbing action in turbulent water. The
The layouts of complete Blast Room System are always different from plant to plant, every blast room must be designed independently depending upon the customer’s requirement. National Enterprises offers variety of Blast Room designs and system configurations which allow us to design a blast room
